您所在的位置:首页 - 师资队伍 - 安全工程系 - 博士后

博士后

黄俊媛

博士后

个人简历



 

个人信息

姓名:黄俊媛

性别:女

职称:师资博士后

导师类别:无

职务:无

所在系所:安全工程系

Email:jyhuang@cqsbzx.com

个人简介

主要研究方向为油气生产设施安全检监测与智能预警、摩擦磨损机理、高能束流加工等。共发表SCI收录论文20篇,其中以第一作者的身份共发表SCI收录论文14篇(其中中科院一区6篇);中文核心6篇;已申请专利7项,其中已授权4项。相关研究成果在Tribology International,Applied Surface Science等领域内国际顶级期刊上发表。

教育及工作经历

2012.9-2016.6 北京化工大学 机电工程学院 过程装备与控制工程 学士

2016.9-2019.6 中国石油勘探开发研究院 机械设计及理论 硕士

2019.7-2020.8 北京航天控制仪器研究所 工业技术研究室 结构设计师

2020.9-2025.6 北京航空航天大学 机械工程及自动化学院 材料加工工程 博士

2025.7-至今 中国天天色天天(北京) 安全工程系 师资博士后

代表性论文

  1. Huang, J. Y., Zhang, W., Zhang, L., Kong, L., & Jiang, B. (2022). One-step rapid preparation of superhydrophobic peek with mechanical, and chemical stability [J]. Applied Surface Science, 605, 154703.

  2. Huang, J. Y., & Zhang, L. (2022). Effects of hot water on the wettability of superhydrophobic metal surfaces[J]. Applied Surface Science, 598, 153677.

  3. Huang, J. Y., & Yang, S. (2022). Investigation on anisotropic tribological properties of superhydrophobic/ superlipophilic lead bronze surface textured by femtosecond laser[J]. Applied Surface Science, 579, 152223.

  4. Huang, J. Y., Zhang, W., Fang, W., & Yi, Y. (2023). Tribology properties of additively manufactured Ti6Al4V alloy after heat treatment[J]. Tribology International, 185, 108485.

  5. Huang, J. Y., Cai, L., Zhang, W., Zhang, L., Jiang, B., & Kong, L. (2022). Influence of surface structure/wettability on tribological properties of titanium[J]. Tribology International, 174, 107747.

  6. Huang, J. Y., Guan, Y., & Ramakrishna, S. (2021). Tribological behavior of femtosecond laser-textured leaded brass[J]. Tribology International, 162, 107115.

  7. Huang, J. Y., Wei, S., Zhang, L., Yang, Y., Yang, S., & Shen, Z. (2019). Fabricating the superhydrophobic nickel and improving its antifriction performance by the laser surface texturing[J]. Materials, 12(7), 1155.

  8. Huang, J. Y. (2021). Study on tribological properties of 35CrMo steel after laser textured[J]. Optik, 226, 165437.

  9. Huang, J. Y., Wei, S., Zhang, L., Shen, Z., Yang, Y., Yang, S., & Zhang, J. (2020). Preparation of Superhydrophobic 35CrMo Surface and Its Tribological Properties in Water Lubrication[J]. JOM, 72, 368-372.

  10. Huang, J. Y., Zhang, W., Xu, H., Fang, W., (2024). Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion. JOM, 1-11.

  11. Huang, J. Y., Zhu, Z., Zhang, L., Guo, D., Niu, Z., & Zhang, W. (2023). Effect of Contact Angle on Friction Properties of Superhydrophobic Nickel Surface[J]. Photonics, 10, 829.

  12. Huang, J. Y., Zhang, L., Wei, S., Yang, Y., Yang, S., & Shen, Z. (2019). Fabrication of the laser textured nickel surface and its tribological property under the water lubrication[J]. AIP advances, 9(8).

  13. Huang, J. Y., Zhang, W., Effect of Heat Treatment Duration on Corrosion Perfor-mance of Electron Beam Manufactured Ti6Al4V Alloy[J]. Rare Metal Materials and Engineering, 2024, 53(2):357~364.

  14. Huang, J. Y., Zhang, W., Effect of heat treatments on tribology property of Ti6Al4V under dry friction[J], Rare Metal Materials and Engineering, 2024.

授权发明专利与软件

  1. 张伟, 黄俊媛, 蒋布辉. 一种高压高精度大电流压电陶瓷恒流驱动电路[P]. 北京市:CN114397935B,2022-10-18.

  2. 张伟, 黄俊媛, 蒋布辉. 一种基于电压闭环的压电陶瓷谐振频率跟踪电路[P]. 北京市:CN114389470B,2024-05-28.

  3. 林学春, 杨盈莹, 张勇, 杨松, 许本有, 黄俊媛, 张景园等. 防止列车通过误报的扫描雷达判断方法[P]. 北京市:CN110161524B,2019-08-23.

  4. 房卫萍, 张伟, 易耀勇, 孔令其, 罗兵兵, 黄俊媛, 彭翰林. 工件形貌的监控系统及相关方法[P]. 广东省:CN115194181B,2023-06-06.

科研项目

中国天天色天天新任教师启动基金,2462025SZBH010,油气管道安全性能提升及智能监测与风险预警系统一体化研究,2025至2027,主持